[Your shopping cart is empty
/ Steel Standards / Steel Plates and Sheets

Steel Plates and Sheets



Standard No. Definition Standard No. Definition
JIS G 3131 Hot-rolled mild steel plate, sheet and strip ASTM A 569/
A 569 M-91
Spec. for steel carbon (0.15 maximum percent) hot-rolled sheet and strip, commercial quality
    ASTM A 621/
A 621 M-91
Spec. for steel sheet and strip, carbon, hot-rolled, drawing quality
    ASTM A 622/
A 622 M-91
Spec. for steel sheet and strip, carbon, hot-rolled, drawing quality, special killed
    BS 1449/1 Carbon and carbon-manganese plate, sheet and strip
                SEC 1.2:91 Spec. for hot rolled steel plate, sheet and wide strip based on formability
                         1.4:91 Spec. for hot rolled wide material based on specified minimum strength
                         1.8:91 Spec. for hot rolled narrow strip based on formability
                       1.10:91 Spec. for hot rolled narrow strip based on specified minimum strength
                       1.14:91 Spec. for hot-rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purpose
    BS EN 10051:92 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels
    DIN 1614/1-86 Flat products of steel; Hot-rolled strip and sheet of mild unalloyed steels; quality specifications
    DIN 1016-87 Hot rolled strip and sheet
    DIN EN 10051 : 92 Continuously hot-rollet uncoated plate, sheet and strip of non-alloy and alloy steels
    NF A 36-102-87 Hot rolled non alloyed mild steel strip for processing
    NF A 36-301-92 Continuous hot rolled strips. Plates and coils
    NF EN 10051 : 92 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels
    ISO 3573-86 Hot-rolled carbon steel sheet of commercial and drawing qualities
    ISO 6317-82 Hot-rolled carbon steel strip of commercial and drawing qualities
JIS G 3141 Cold rolled carbon steel sheets and strip ASTM A109-91 Spec. for cold-rolled carbon steel strip
    ASTM A109
M-91
Spec. for cold-rolled carbon steel strip (Metric series)
    ASTM A366/ A366
M-91
Spec. for steel, Carbon, cold-rolled sheet, commercial quality
    ASTM A619/
A619 M-91
Carbon steel sheet, cold-rolled, drawing quality
    ASTM A 620/
A 620 M-91
Carbon steel sheet, cold-rlled, drawing quality, special killed
    BS 1449/1 Carbon and Carbon-manganese plate, sheet and strip
       SEC1.3 :91 Spec. for cold rolled steel plate, sheet and wide strip for vitreous enameling based on formability.
              1.5: 91     Spec. for cold rolled wide material based on specified minimum strength
              1.9: 91 Spec. for cold rolled narrow strip based on formability
               1.11:91 Spec. for cold rolled narrow strip based on specified minimum strength
             11.15:91 Spec. for cold rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes
    BS EN 10130:91 Spec. for cold rolled low carbon steel flat products for cold forming
     BS EN 10130:92 Cold-rolled uncoated low carbon and high yield strength flat products for cold forming
    DIN 1627-87 Cold-rolled strip of soft unalloyed steels; quality specifications, in width not exceeding 650 mm
     DIN EN 10130-91 Spec. for cold rolled low carbon steel flat products for cold forming
    DIN EN 10131:92 Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming
JIS G3141   DIN 1623/2-86 Cold reduced sheet and strip: general purpose structural steels
    DIN 1541-75 Flat products of steel; cold-rolled wide mill strip and sheet of unalloyed steels; dimensions, tolerances on dimensions and form
    DIN 1544-75 Cold rolled steel strip: Dimensions, permissible variations on Dimensions and form
    NF EN 10130-91 Spec. for cold rolled low carbon steel flat products for cold forming
    NF EN 10131-92 Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming
    ISO 3574-86 Cold reduced carbon steel sheet of commercial and drawing qualities
    ISO 5954-84 Cold-reduced carbon steel sheet to hardness requirements
JIS G 3133 Decarburized steel sheets and strip for porcelain enameling ASTM A 424-91 Spec. for steel for porcelain enamelling
    ISO 5001-80 Cold-reduced carbon steel sheet for vitreous enamelling
    DIN 1623/3-87 Steel flat products; cold reduced sheets and strip: mild unalloyed steels for vitreous enamelling
JIS G 3302 Hot-dip zinc-coated steel sheets and coils ASTM A361/
A361 M-85
Spec. for steel sheets, zinc-coated (galvanized) by the hot-dip process for roofing
    ASTM A446/
A446 M-91
Spec. for steel sheet, zinc-coated by the hot-dip process, physical quality
    ASTM A526/
A526 M-90
Spec. for steel sheet, zinc-coated (galvanized) by the hot-dip process, commercial quality
    ASTM A527/
A527 M-90
Spec. for steel sheet, zinc-coated (galvanized) by the hot-dip process, lock-forming quality
    ASTM A528/
A528 M-90
Spec. for steel sheet, zinc-coated (galvanized) by the hot-dip process, drawing quality
    ASTM A642/
A642 M-90
Spec. for steel sheet, zinc-coated (galvanized) by the hot-dip process, drawing quality, special killed
    BS EN 10142-91 Spec. for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming
     BS EN 10143-93 Continuously hot-dip metal coated steel sheet and strip
    BS EN 10147-92 Continuously hot-dip zinc coated structural steel sheet and strip
    BS 3083-88 Hot-dip zinc coated and hot-dip aluminium /zinc coated corrugated steel sheets for general purposes
    DIN EN 10142-91 Spec. for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming
    DIN EN 10143-93 Continuously hot-dip metal coated steel sheet and strip
    DIN EN 10147-92 Spec. for continuously hot-dip zinc-coated structural steel sheet and strip
    DIN 59231-53 Corrugated sheet, tile sheet, galvanized
    DIN 59232-78 Flat steel products, hot galvanized wide strip and sheet of mild unalloyed steels and general structural steels
    NF EN 10142-92 Spec. for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming
    NF EN 10147-92 Continuously hot-dip zinc coated structural steel sheet and strip
    NF A36-322-78 Continuous hot-dip zinc-coated steel plates with required minimum yield stress intended for cold forming
    ISO 3575-76 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
    ISO 4998-91 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
JIS G 3317 Hot-dip zinc-5% aluminum alloy-coated steel sheets and coils ASTM 875/
A875 M-88
Aluminum alloy metallic-coated by the hot-dip process
JIS G 3312 Prepainted hod-dip zinc-coated steel sheets and coils ASTM A755/
A755 M-89
Spec. for steel sheet zinc-coated (galvanized) by the hot-dip process and coil-coated for roofing and siding, general requirements
JIS G 3318 Prepainted hot-dip zinc-5% aluminium alloy-coated steel sheets and coils ASTM A755/
A755 M-89
Spec. for steel sheet, metallic coated by the hot-dip process and prepainted by the coil-coating process for exterior exposed building products.
JIS G 3313 Electrolytic zinc-coated steel sheet ASTM 591/
A591 M-89
Spec. for electrolytic zinc-coated cold-rolled steel sheet
    NF A 36-160-79 Iron and steel - Electrolytic zinc-coated plates-coating prescription
    ISO 5002-82 Hot rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
JIS G 3303 Tinplate and Black-plate ASTM A624-90 Single-reduced electrolytic tinplate
    ASTM A624 M-90 Spec. for tin plate, single-reduced electrolytic (metric)
    ASTM A625-85 Single-reduced black plate
    ASTM A625 M-85 Spec. for tin mill products, black plate, single-reduced (Metric)
    ASTM A626-90 Spec. for tin mill products, electrolytic tin plate, double-reduced
     ASTM A626 M-90 Spec for tin mill products, electrolytic tin plate, double-reduced (Metric)
    ASTM A650/
A 650 M-88
Spec. for tin mill products, black plate, double-reduced
    BS EN 10203-91 Spec. for cold reduced electrolytic tinplate
    BS EN 10205-92 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chronium/ chronium oxide coated steel
    DIN EN 10203-91 Spec. for cold reduced electrolytic tinplate
    DIN EN 10205-92 Spec. for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
    NF EN 10203-91 Spec. for cold reduced electrolytic tinplate
    NF EN 10205-92 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
    ISO 1111/1-83 Single cold-reduced tinplate and single cold- reduced blackplate - Part I: Sheet
    ISO 1111/2-83 Single cold-reduced tinplate and single cold-reduced blackplate - Part II: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form
     ISO 4977/1-84 Double cold-reduced electrolytic tinplate - Part I: Sheet
    ISO 4977/2-88 Double cold-reduced electrolytic tinplate - Part 2: Coil for subsequent cutting into sheets
    ISO 5950-91 Cryolite, natural and artificial, and aluminum fluodide for industrial use - Determination of phosphorus content - Reduced molybdophsphate photometric method
JIS G 3314 Hot-dip aluminum coated steel sheets ASTM A463-88 Spec. for cold-rolled, aluminum type I and type II, steel sheet
    BS 6830:87 Continuously hot-dip aluminum/zinc alloy coated cold rolled carbon steel flat products
    ISO 5000-80 Continuously hot-dip aluminum-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
JIS G 3315 Chromium Plated Tin Free Steel ASTM A657-87 Spec. for tin mill products, black plates, electrolytic Cr-coated, single and double reduced
    BS EN 10202-90 Spec. for cold reduced electrolytic chromium/chromium oxide coated steel
    DIN EN 10202-90 Spec. for cold reduced electrolytic chromium/chromium oxide coated steel
    NF EN 10202-89 Spec. for cold reduced electrolytic chromium/chromium oxide coated steel